Slatpanel Contemporary Walnut Acoustic Wood Wall Panel
- Additional information
- Panel Specificatons
- Technical & Installation
Slatpanel Contemporary Walnut Acoustic Wood Wall Panels
Looking to add a touch of luxury to your walls and ceilings? SlatPanel walnut acoustic wood wall panels are the perfect solution!
The perfect balance between contemporary modern styling and high-quality acoustic properties make these panels a must-have for any home, office or commercial property. Plus, they’re easy and quick to install!
SlatPanel acoustic wood panels are carefully crafted and beautifully designed decorative wall and ceiling panels with unrivalled acoustic properties.
Finished in a luxury smooth walnut veneer, these acoustic slatted wall panels consist of wooden strips attached to a high quality recycled acoustic felt material and finished in an attractive smooth walnut veneer layer.
Boasting a contemporary modern appearance and Class-A superior sound absorption makes these acoustic wall panels the perfect choice for a variety of applications such as in the home, office, bars & restaurants, schools and more.
|Dimensions||244 × 60 × 2.2 cm|
22mm (13mm Slat + 9mm Acoustic Felt)
Sample, Full Board
Panel Size: 2400mm (H) x 600mm (W) x 22mm (D) – 1.44m² Coverage
Finish: Walnut Veneer
Felt Colour: Black
SlatPanel’s Acoustic Wooden Wall Panels are available in 4 contemporary colours.
- Concrete Grey
- Smoked Oak
Full Panel : 2400mm (H) x 600mm (W) x 22mm (D)
Slats : 2400mm (H) x 27mm (W) x 13mm (D)
Gap Between Slats : 13mm
Acoustic Felt Thickness : 9mm
Panel Coverage : 1.44m²
How to cut SlatPanel
Cutting a panel width way:
To cleanly cut a panel across its width we recommend using a sharp saw to cut through both the slats and the felt backing.
Cutting a panel length way:
Cutting a panel lengthways can be easily achieved by using a craft knife or similar.
A sharp knife is essential to achieve a clean cut.
How to install SlatPanel
There are three different options when it comes to installing SlatPanel® panels.
1. Glue the panel directly onto the wall
Using a strong construction glue or grab adhesive apply a generous amount to the reverse of the felt backing and place onto your wall.
2. Screw the panel directly onto the wall
Panels can be screwed directly into your wall using a minimum of 9 screws per panel at 200mm intervals across the width and 800mm intervals down the length of the panel.
We recommend using black screws for a seamless installation.
If installing onto ceilings, be sure that all screws are fixed into the ceiling joists.
If installing onto plasterboard then be sure to use the correct fixings to ensure a secure mounting.
Apply screws directly through the felt backing into your wall.
3. Screwing the panels onto 45mm timber battens.
For maximum sound absorption we recommend mounting the panels onto a 45mm timber batten framework fixed to your wall.
By placing a good quality acoustic insulation such as Rockwool in the void space between your wall and the panel will achieve Class-A sound absorption.
Care and Maintenance
We recommend coating the slats of the panel with a protective finish such as a quality wood oil to help keep the natural look and feel of the wood.
Once treated a light dusting or vacuuming will help to prevent any gathering of dust.
If you decide to keep the panels untreated then periodically wiping them down using a dry cloth is all that’s needed to keep the panels looking in prime condition.
The acoustic felt backing used on these panels has been certified to “B – s1, d0” fire rating.
This means that in the event of a fire the panel’s smoke production is very limited and it does not produce flaming droplets.
Sound absorption with a 45mm gap behind the panels and a closed frame around the edges.
DS/EN ISO 354:2003
- Test Area: 15.84m²
- Room Volume: 215m²
- Room Surface Area : 238m³
To achieve Class-A sound absorption we recommend installing a sound insulation such as Rockwool in a 45mm void space behind the panels.