[ivory-search id="208870" title="Ivory Search"]
0
Please contact our team on 020 8617 8979 for our express courier options
44 Stores, 44 Berth, Tilbury Docks, RM18 7HP
The Slatpanel Contemporary Oak With Black Felt Acoustic Wood Panel is a modern and sophisticated wall panel that is designed to make a statement in any room. The sleek and contemporary slat design is crafted from high-quality oak wood, and the black felt adds an extra layer of sophistication to this already stylish piece. This wall panel is perfect for adding a touch of elegance to your living room, bedroom, or office space.
Not only is our wood panel visually appealing, but it also has practical acoustic benefits. The felt material is designed to absorb sound, making this an excellent choice for those looking to reduce noise levels in their home or office. The acoustic properties of this wall panel make it ideal for use in shared living spaces. Perfect for living rooms or open-plan offices, where noise reduction is essential.
This product is incredibly easy to install, making it the perfect choice for those looking for a DIY project. The panels can be easily mounted to the wall using the included hardware, and the simple design means that it can be done quickly and with minimal effort. Whether you’re an experienced DIY enthusiast or a beginner, you’ll be able to install this wall panel with ease.
Coverage: 1.44m²
Our panels come in a range of colours:
Weight | 12000 g |
---|---|
Dimensions | 244 × 60 × 2.2 cm |
Panel Colour | Oak with Black Felt |
Panel Height | 2400cm |
Panel Width | 600cm |
Panel Depth | 22mm (13mm Slat + 9mm Acoustic Felt) |
Coverage | 1.44m² |
Sound Absorption | Class A |
Felt Colour | Black Felt |
Size | Full Board, Sample |
Panel Size: 2400mm (H) x 600mm (W) x 22mm (D) – 1.44m² Coverage
Finish: Smoked Oak Veneer
Felt Colour: Black
SlatPanel’s Acoustic Wooden Wall Panels are available in 4 contemporary colours.
Full Panel : 2400mm (H) x 600mm (W) x 22mm (D)
Slats : 2400mm (H) x 27mm (W) x 13mm (D)
Gap Between Slats : 13mm
Acoustic Felt Thickness : 9mm
Panel Coverage : 1.44m²
Cutting a panel width way:
To cleanly cut a panel across its width we recommend using a sharp saw to cut through both the slats and the felt backing.
Cutting a panel length way:
Cutting a panel lengthways can be easily achieved by using a craft knife or similar.
A sharp knife is essential to achieve a clean cut.
There are three different options when it comes to installing SlatPanel® panels.
1. Glue the panel directly onto the wall
Using a strong construction glue or grab adhesive apply a generous amount to the reverse of the felt backing and place onto your wall.
2. Screw the panel directly onto the wall
Panels can be screwed directly into your wall using a minimum of 9 screws per panel at 200mm intervals across the width and 800mm intervals down the length of the panel.
We recommend using black screws for a seamless installation.
If installing onto ceilings, be sure that all screws are fixed into the ceiling joists.
If installing onto plasterboard then be sure to use the correct fixings to ensure a secure mounting.
Apply screws directly through the felt backing into your wall.
3. Screwing the panels onto 45mm timber battens.
For maximum sound absorption we recommend mounting the panels onto a 45mm timber batten framework fixed to your wall.
By placing a good quality acoustic insulation such as Rockwool in the void space between your wall and the panel will achieve Class-A sound absorption.
We recommend coating the slats of the panel with a protective finish such as a quality wood oil to help keep the natural look and feel of the wood.
Once treated a light dusting or vacuuming will help to prevent any gathering of dust.
If you decide to keep the panels untreated then periodically wiping them down using a dry cloth is all that’s needed to keep the panels looking in prime condition.
The acoustic felt backing used on these panels has been certified to “B – s1, d0” fire rating.
This means that in the event of a fire the panel’s smoke production is very limited and it does not produce flaming droplets.
Sound absorption with a 45mm gap behind the panels and a closed frame around the edges.
DS/EN ISO 354:2003
To achieve Class-A sound absorption we recommend installing a sound insulation such as Rockwool in a 45mm void space behind the panels.